Title page for 954306017


[Back to Results | New Search]

Student Number 954306017
Author Chian-lung Wang(王乾隆)
Author's Email Address gx9703@yahoo.com.tw
Statistics This thesis had been viewed 1761 times. Download 1298 times.
Department Executive Master of Industrial Management
Year 2007
Semester 2
Degree Master
Type of Document Master's Thesis
Language zh-TW.Big5 Chinese
Title The Study of Optimal Inventory Level for SSP PET Resin
- A Case Study of A-Company
Date of Defense 2008-07-02
Page Count 88
Keyword
  • Continuous process
  • Integer linear programming.
  • Inventory cost
  • Simulation
  • Abstract The enterprise making a profit two big factors are cost down and increasing new revenues. In this research, the major developed models is a demand deterministic “production - inventory - customer demand” model. The objection function is to maximize the profit, which is the difference between revenues and costs. Production, selling, and inventory amount are the control variables. In this model setup and inventory costs are considered. The inventory level can be set at different number. The production plan is arranged to make the setup and inventory cost down.
    In this research, we select a bottle resin maker in Taoyuan, Taiwan as the case study company. Firstly, we study and calculate the inventory cost, then we use the simulation software with arena to build up a continuous and discrete simulation model of the inventory system. Finally, use the built-in function of the simulation software to get the optimal solution.
    The condition of production capacity is higher than the customer’s demand in case model. By simulating all the variables and observing their dynamic behavior, the result ( ) shows the best solution increasing 10.5 % profit and the inventory is down 75.9% with the real production data.
    During the problem-solving procedure, we find the simulation software really is easier to get the optimal solution. Furthermore, we also find that we can easily observe the change of output by just adjust the corresponding parameter, it helps us in decision-making process and also has good practical applications in the real inventory management works.
    Table of Content 目錄
    中文摘要ii
    誌謝iv
    目錄v
    圖目錄ix
    表目錄xii
    第1章 緒論1
    第2章 文獻探討6
    2.1 PET固聚酯粒產業介紹6
    2.2 存貨管理13
    2.3 系統模擬23
    2.4 整體規劃技術26
    第3章 研究方法28
    3.1 方法架構與流程28
    3.2 個案現行狀況說明29
    3.3 存貨管理成本項目說明32
    3.4 模型推導方法說明36
    第4章 實例分析46
    4.1 案例背景分析46
    4.2 案例產業作業規定與成本效益計算說明47
    4.3 模型建構51
    4.4 模式驗證與確認57
    4.5 模式輸出分析61
    第5章 結論與建議66
    5.1 研究結論66
    5.2 未來研究建議67
    參考文獻68
    附錄A.71
    附錄B.74
    附錄C.77
    附錄D.81
    Reference 中文部分:
    1.Harrell,Tumay著,系統模擬,簡聰海、鄒靖寧譯,二版,高立圖書,民國89年。
    2.Philip E.Hicks著,工業工程與管理,謝志光、施武榮譯,初版,美商麥格˙希爾國際股份有限公司(台灣),民國89年4月。
    3.林則孟,系統模擬理論與應用,初版,滄海書局,台中,民國90年。
    4.林則孟,生產計劃與管理,初版,華泰書局,民國95年。
    5.林清河,物料管理,三版,華泰書局,民國95年。
    6.劉秋樑,限制理論在電子元件生產存貨管理應用,國立臺灣科技大學,管理研究所,碩士論文,民國94年。
    7.蕭裕正,可控前置時間之存貨模型研究,國立台灣科技大學,工業管理系,碩士論文,民國90年。
    8.張朝清,台灣聚酯長纖維紡織業供應鏈策略之研究,國立台北科技大學,商業自動化與管理研究所,碩士論文,民國89年。
    9.張喬齡,TOC式扣件生產系統之模擬實例研究,國立成功大學,工學院工程管理研究所,碩士論文,民國93年。
    10.林育壯,不可靠生產系統再生產點與固定生產批量存貨模式,國立成功大學,工業與資訊管理研究所,碩士論文,民國93年。
    11.楊廣宜,以基因演算法結合離散事件模擬求解最佳CONWIP生產架構,國立成 功大學,製造工程研究所,碩士論文,民國91年。
    12.張治魯,顧客服務水準控制與供應鏈管理應用於改善傳統產業營業獲利之研究,國立成功大學,交通管理科學研究所,碩士論文,民國91年。
    13.許丕誠,存貨政策與存貨成本關係之動態性研究-以XX公司為例,國立中山大學,資訊管理研究所,碩士論文,民國91年。
    14.賴士葆,生產與作業管理三版:理論與實務,華泰書局,民國93年。
    15.顏憶茹、張淳智,物流管理-原理、方法與實例,前程文化事業出版社,民國97年 四版四刷。
    16.劉南雄,石化業原料轉運及風險共擔之效益分析,國立高雄第一科技大學,運籌管理系,碩士論文,民國94年。
    17.吳心怡,運用多目標模擬最佳化演算法求解生產控制與庫存管理問題,國立高雄第一科技大學運籌管理系,碩士論文,民國95年。
    18.蘇雄義,企業物流導論,華泰書局,2002年2版。
    19.遠東紡織(股)公司發行九十六年度第二次無擔保普通公司債公開說明書,96年 11月。
    20.新光合成纖維股份有限公司96年 4月公開說明書,現金增資發行新股暨國內第三次無擔保轉換公司債用。
    英文部分:
    1.Altiok, T., Melamed, B.,“Simulation Modeling and Analysis With Arena ”, Elsevier,(2007).
    2.Baker, K. R., Magazine, M. J. and Nuttle, H.L.W.,“The Effect of Commonality on Safety Stocks in a Simple Inventory Model”, Management Science, Vol.32, P.982-988,(1986).
    3.Benton, W. C.,“Safety Stock and Service Levels in Periodic Review Inventory Systems,”The Journal of Operational Research Society, Vol.42 , P.1087-1095, (1991).
    4.Ketlton, W. D., Sadowski, R. P., and Sturrock, D. T.,“Simulation With Arena ”, 4th ed.,McGraw-Hill,(2007).
    5.Silver, E.A. & Peterson, R.,“Decision Systems for Inventory Management and Production Planning”,Wiley,New York ,(1985).
    6.Silver, E. A., Pyke, D. F., and Peterson, R.,“Inventory Management and Production Planning and Scheduling ”,3rd ed.,Wiley,New York ,(1998).
    7.Tony, W,“Best Practice in Inventory Management”,Wiley,New York (1997).
    Advisor
  • Yingchieh Yeh(葉英傑)
  • Files
  • 954306017.pdf
  • approve in 1 year
    Date of Submission 2008-07-17

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have dissertation-related questions, please contact with the NCU library extension service section.
    Our service phone is (03)422-7151 Ext. 57407,E-mail is also welcomed.