Title page for 91431004


[Back to Results | New Search]

Student Number 91431004
Author Cheng-Chung Kung(龔政中)
Author's Email Address No Public.
Statistics This thesis had been viewed 2501 times. Download 2639 times.
Department Executive Master of Business Administration
Year 2004
Semester 1
Degree Master
Type of Document Master's Thesis
Language zh-TW.Big5 Chinese
Title A Study of Molding Involvement Product Collabroative Design、Technological Innovation on Development Performance
Date of Defense 2004-12-03
Page Count 74
Keyword
  • Collaborative Design
  • Molding
  • Technological Inn
  • Abstract 「模具業」被稱為機械工業之母,為大量生產與標準化的產品工具,具有快速生產、品質精良與生產價格低廉之特性。模具在全球化市場激烈的競爭中,扮演著重要的角色,隨著產品生命週期縮短,所有開發專案必須在有限的時間內,完成產品開發手續,因此間接影響到模具業必須配合顧客的要求,從顧客工業造形設計的構想發展、機構設計的實體建立、最初模型建立、產品試裝與最後的開模檢討,皆要靠模具開發的提早溝通與參與,才能縮短開發時間與降低不確定因素的風險,進而提高產品開發的成功率。就模具廠而言,模具是一項精密技術的產品,相對於顧客,模具是大量、快速生產產品的生產工具。任何一家企業必須仰賴不斷的提供新產品的設計,才能滿足市場需求,不斷創新的結果,模具製作技術相對的也提昇,其精確度、信賴度將會間接影響零件的相互搭配性,進而影響到完成品的品質,因此從模具技術高低可以看出一個國家工業技術水準的程度。
      研究實證結果顯示,模具業參與產品協同設計程度不同,對於模具開發績效有顯著影響;以模具類別而言,塑膠模具與沖壓模具參與品協同設計程度愈高,愈能提高模具開發績效;以技術創新而言,在塑膠模具屬於技術創新程度高或技術創新程度低,對於參與協同設計程度愈高,愈能提高模具開發績效;另外在沖壓模具,屬於技術創新程度高,對於參與協同設計程度愈高,愈能提高模具開發績效。
    Table of Content 論文摘要………………………………………………………………………………I
    目錄……………………………………………………………………………………II
    圖目錄…………………………………………………………………………………IV
    表目錄…………………………………………………………………………………V
    第一章 緒論…………………………………………………………………………1
      第一節 研究動機………………………………………………………………1
      第二節 研究目的………………………………………………………………2
      第三節 研究限制………………………………………………………………3
      第四節 論文架構與研究流程…………………………………………………4
    第二章 文獻探討……………………………………………………………………6
      第一節 產品協同設計…………………………………………………………6
      第二節 技術創新………………………………………………………………11
      第三節 模具開發績效…………………………………………………………16
    第三章 研究方法……………………………………………………………………27
      第一節 研究架構………………………………………………………………27
      第二節 研究變數的操作性定義與衡量………………………………………28
      第三節 研究問卷………………………………………………………………30
      第四節 研究假設………………………………………………………………32
      第五節 研究樣本………………………………………………………………34
      第六節 資料分析方法…………………………………………………………35
    第四章 研究結果分析………………………………………………………………37
      第一節 敘述統計分析…………………………………………………………37
      第二節 信度與效度分析………………………………………………………41
      第三節 因素分析與群集分析…………………………………………………42
      第四節 產品協同設計與模具開發績效關係之分析…………………………47
      第五節 技術創新對「產品協同設計與模具開發績效關係」影響之分析…51
      第六節 線性結構關係模式……………………………………………………55
      第七節 本章總結………………………………………………………………58
    第五章 結論與建議…………………………………………………………………60
      第一節 研究結論………………………………………………………………60
      第二節 研究貢獻………………………………………………………………62
      第三節 後續研究建議…………………………………………………………64
    參考文獻………………………………………………………………………………65
    附錄一:研究問卷……………………………………………………………………69
    附錄二:線性結構關係模式…………………………………………………………73
    Reference 一、中文部分
    1.陳順宇﹙民90﹚,多變量分析,台北:華泰書局。
    2.周文賢﹙民91﹚,多變量統計分析:SAS/STAT使用方法,台北:智勝文化。
    3.周文賢、林嘉力﹙民90﹚,新產品開發與管理,台北:華泰書局。
    4.林建煌﹙民91﹚,行銷管理,台北:智勝文化。
    5.白光華﹙民93﹚,創新協同產品研發,台北:中國生產力中心。
    6.2003金屬製品業年鑑,經濟部中小企業處,金屬中心ITIS計劃。
    二、英文部分
    1.Barczak﹐G.﹙1995﹚“New Product Strategy﹐Process and Performance in the Telecommunications Industry”Journal of Product Innovation Management﹐12﹙2﹚﹐pp.224-234.
    2.Bowersox﹐D.J.﹐Stank﹐T.P. & Daugerty﹐P.J.﹙1999﹚“Lean Launch:
    Managing Product Introduction Risk Through Response-Based Logistics”Journal of Product Innovation Management﹐16﹙6﹚﹐pp.557-568.
    3.Brentani﹐U.﹙2001﹚“Innovative Versus Incremental New Business Services
    :Different Keys for Achieving Success”Journal of Product Innovation Ma-
    nagement﹐18﹙3﹚﹐pp.169-187.
    4.Chiesa﹐V.﹙2000﹚“Global R&D Project Management and Organization:A Taxonomy”Journal of Product Innovation Management﹐17﹙5﹚﹐pp.341-359.
    5.Clark﹐K.B.﹐﹙1989﹚“Project Scope and Project Performance:The Effect of
    Parts Strategy and Supplier Involvement on Product Development”Manageme-
    nt Science﹐35﹙10﹚.
    6.Cogliano﹐R.﹐Chiesa﹐V. & Manzini﹐R.﹙2000﹚“Differences and Simi-
    larities in Managing Technological Collaborations in Research”Journal of
    Engineering Technology Management﹐17﹙2﹚﹐pp.193-224.
    7.Cooper﹐R.G. & Kleinschmidt﹐E.J.﹙1996﹚“Winning Business in Product
    Development:The Critical Success Factors”Research Technology Manage-
    ment﹐39﹙4﹚﹐pp.18-29.
    8.Corswant﹐F.V. & Tunalv﹐C.﹙2002﹚“Coordinating Customers and Proact-
    ive Suppliers:A Case Study of Supplier Collaboration in Product Developme-
    nt”Journal of Engineering and Technology Management﹐19﹙3﹚﹐pp.249
    -261.
    9.Driva﹐H.﹐Pawar﹐K.S. & Menon﹐U.﹙2000﹚“Measuring Product Deve-
    lopment Performance in Manufacturing Organizations”International Journal of Production Economics﹐63﹙2﹚pp.147-159.
    10.Garcia﹐R. & Calantone﹐R.﹙2002﹚“A Critical Look at Technological Inno-
    vation Typology and Innovativeness Terminology:A Literature Review”Journal of Product Innovation Management﹐19﹙2﹚﹐pp.110-132.
    11.Gemser﹐G. & Leenders﹐M.A.A.M.﹙2001﹚“How Integrating Industrial De-
    sign in the Product Development Process Impacts on Company Performance” Journal of Product Innovation Management﹐18﹙1﹚﹐pp.28-38.
    12.Hultink﹐E.J. & Robben﹐H.S.J.﹙1995﹚“Measuring New Product Success:The Difference That Time Perspective Makes”Journal of Product Innovation Management﹐12﹙5﹚﹐pp.392-405.
    13.Jassawalla﹐A.R & Sashittal﹐H.C.﹙1998﹚“An Examination of Collaborat-
    tion in High-Technology New Product Development Processes”Journal of
    Product Innovation Management﹐15﹙3﹚﹐pp.237-254.
    14.Kahn﹐K.B.﹙1996﹚“Interdepartmental Integration:A Definition with Im-
    plication for Product Development Performance”Journal of Product Innova-
    tion Management﹐13﹙2﹚﹐pp.137-151.
    15.Kamath﹐R.R. & Liker﹐J.K.﹙1994﹚“A Second Look at Japanese Product
    Development”Harvard Business Review﹐pp.154-170.
    16.Kumar﹐Scheer & Kotler﹙2000﹚“From Market Driven to Market Driving”
    Eurpean Management Journal﹐18﹙2﹚﹐pp.129-142.
    17.Liker﹐J.K.﹐Collins﹐P.D. & Mull﹐F.M.﹙1999﹚“Flexibility and Standard-
    ization Test of a Contingency Model of Product Design-Manufacturing Integrati-
    on”Journal of Product Innovation Management﹐16﹙3﹚﹐pp.248-267.
    18.Littler﹐D.﹐Leverick﹐F. & Bruce﹐M.﹙1995﹚“Factors Affecting the Proc-
    ss of Collaborative Product Development :A Study of UK Manufacturers of
    Information and Communications Technology Products”Journal of Product
    Innovation Management﹐12﹙1﹚﹐pp.16-32.
    19.Marsh﹐S.J. & Stock﹐G.N.﹙2003﹚“Building Dynamic Capabilities in
    New Product Development Through Intertemporal Integration”Journal of
    Product Innovation Management﹐20﹙2﹚﹐pp.136-148.
    20.McDonough﹐E.F.﹐Kahn﹐K.B. & Barczak﹐G.﹙2001﹚“An Investigation
      of the Use of Global﹐Virtual and Colocated New Product Development Teams
    ”Journal of Product Innovation Management﹐18﹙2﹚﹐pp. 110-120.
    21.Micheal﹐K.﹐Rochford﹐L. & Wotruba﹐T.R.﹙2003﹚“How New Product
    Introductions Affect Sales Management Strategy:The Impact of Type of New-
    ness of the New Product”Journal of Product Innovation Management﹐20
    4﹚﹐pp.270-283.
    22.Osullivan﹐A.﹙2003﹚“Dispersed Collaboration in a Multi-Firm﹐Multi-Ter-
    m Product-Development Project”Journal of Engineering and Technology Ma-
    nagement﹐20﹙1﹐2﹚﹐pp.93-116.
    23.Petersen﹐K.J.﹐Handfield﹐R.B. & Ragatz﹐G.L.﹙2003﹚“A Model of Sup-
    plier Integration Into Product Development”Journal of Product Innovation
    Management﹐20﹙4﹚﹐pp.284-299.
    24.Powell﹐W.﹐﹙1987﹚“Hybrid Organizational Arrangements:New Form or
    Transitional Development”California Management Review﹐30﹐pp.67-87.
    25.Ragatz﹐G.L.﹐Handfield﹐R.B.﹐& Scannell﹐T.V.﹐﹙1997﹚“Success Factors
    for Integrating Suppliers Into New Product Development”Journal of Product Innovation Management﹐14﹙3﹚﹐pp.190-202.
    26.Sahay﹐A. & Riley﹐D.﹙2003﹚“The Role of Resource Access﹐Market Co-
    nsiderations﹐and the Nature of Innovation in Pursuit of Standards in the New
    Product Development Process”Journal of Product Innovation Management﹐20﹙5﹚﹐pp.338-355.
    27.Sanchez﹐A.M. & Perez﹐M.P.﹙2003﹚“Cooperation and the Ability to M-
    inimize the Time and Cost of New Product Development within the Spanish
    Automotive Supplier Industry”Journal of Product Innovation Management﹐20﹙1﹚﹐pp.57-69.
    28.Song﹐X.M. & Montoya-Weiss﹐M.M.﹙1998﹚“Critical Development Activ-
    ivities for Really New Versus Incremental Products”Journal of Product Innov-
    ation Management﹐15﹙2﹚﹐pp.124-135.
    29.Song﹐M. & Montoya-Weiss﹐M.M.﹙2001﹚“The Effects of Perceived Tech-
    nological Uncertainty on Japanese New Product Development”Academy of Management Journal﹐44﹙1﹚﹐pp.61-80.
    30.Souder﹐W.E.﹐Sherman﹐J.D. & Cooper﹐R.D.﹙1998﹚“Environmental
    Uncertainty﹐Organizational Integration and New Product Development Effe-
    ctiveness:A Test of Contingency Theroty”Journal of Product Innovation
    Management﹐15﹙6﹚﹐pp.520-533.
    31.Swink﹐M.L﹐Sandvig﹐C. & Mabert﹐V.A.﹙1996﹚“Customizing Con-
    current Engineering Processes:Five Case Studies”Journal of Product Inno-
    vation Management﹐13﹙3﹚﹐pp.229-244.
    32.Swink﹐M.﹙2000﹚“Technological Innovativeness as a Moderator of New
    Product Design Integration and Top Management Support”Journal of Product Innovation Management﹐17﹙3﹚﹐pp.208-220.
    33.Trygg﹐L.﹙1993﹚“Concurrent Engineering Practices in Selected Swedish
    Companies:A Movement or an Activity of the Few”Journal of Product Inno
    vation Management﹐10﹙5﹚﹐pp.403-415.
    34.Veryzer﹐R.W.﹙1998﹚“Discontinuous Innovation and The New Product De-
    velopment Process”Journal of Product Innovation Management﹐15﹙4﹚pp.
    304-321.
    35.Wasti﹐S.N. & Liker﹐J.K.﹙1997﹚“Risky Business or Competitive Power?Supplier Involvement in Japanese Product Design”Journal of Product Innova-
    tion Management﹐14﹙5﹚﹐pp.337-355.
    36.Wasti﹐S.N. & Liker﹐J.K.﹙1999﹚“Collaborating with Suppliers in Product Development :A U.S. and Japan Comparative Study”IEEE Transactions on Engineering Management﹐46﹙4﹚﹐pp.444-460.
    37.Wen﹐J. & Kobayashi﹐S.﹙2002﹚“Impacts of Government High-Tech Policy:A Case Study of CAD Technology in China”Journal of Engineering and Technology Management﹐19﹙3﹐4﹚﹐pp.321-342.
    Advisor
  • Dong-Shang Chang(張東生)
  • Files
  • 91431004.pdf
  • approve immediately
    Date of Submission 2004-12-15

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have dissertation-related questions, please contact with the NCU library extension service section.
    Our service phone is (03)422-7151 Ext. 57407,E-mail is also welcomed.