Title page for 87323052


[Back to Results | New Search]

Student Number 87323052
Author Li-chuan Yu(游麗娟)
Author's Email Address No Public.
Statistics This thesis had been viewed 1904 times. Download 809 times.
Department Mechanical Engineering
Year 1999
Semester 2
Degree Master
Type of Document Master's Thesis
Language zh-TW.Big5 Chinese
Title Optimization for geometric shape design using genetic algorithms(GAs)
Date of Defense 2000-07-14
Page Count 95
Keyword
  • crossover
  • GAs
  • genetic algorithms
  • HGAs
  • individual
  • mutation
  • population
  • shape design
  • Abstract none
    Table of Content 第一章 緒論
    第二章 基因演算法之理論與計算
    第三章 基因演算法則之敏感度分析
    第四章 幾何形狀設計之實例
    第五章 結果與討論
    Reference 1.CFX-TASCflow Version 2.8 User Documentation 1.
    2.CFX-TASCflow Version 2.8 theory Documentation.
    2.CFX-TASCflow Version 2.8 theory Documentation.
    4.Goldberg D. E., “Genetic Algorithms in Search, Optimization, and Machine Learning,” Addison-Wesley, 1989.
    5.Holland J. H., “Adaptation in Natural and Artificial Systems,” Ann Arbor: The University of Michigan Press, 1975.
    6.Lancaster P., Salkauskas K. “Curve and surface fitting :an introduction,” Academic Press, 1986.
    7.Langdon W. B., ”Genetic Programming and Data Structure: Genetic Programming + Data Structure = Automatic Programming,” Kluwer Academic Publishers, 1998.
    8.Li J., Satofuka N., ” Optimum Aerodynamic Design Using Whole Annealing Genetic Algorithms”, Computational Fluid Dynamics JOURNAL Vol. 8, No. 1, pp. 266-273, April 1999.
    8.Li J., Satofuka N., ” Optimum Aerodynamic Design Using Whole Annealing Genetic Algorithms”, Computational Fluid Dynamics JOURNAL Vol. 8, No. 1, pp. 266-273, April 1999.
    10.Michalenice Z., ”Genetic Algorithms + Data Structures = Evolution Progress, 3th”Springe, 1996.
    10.Michalenice Z., ”Genetic Algorithms + Data Structures = Evolution Progress, 3th”Springe, 1996.
    12.Peyret Roger, Taylor T. D., “Computational Methods for Fluid Flow,” Springer-Verlag, 1983.
    13.Press W.H., Flannery B.H., Teukolsky A., ”Numerical recipes in C, ”Cambridge University Press, 1987.
    14.Rao S.S., “Optimization Theory and Applications (2nd),”1979.
    14.Rao S.S., “Optimization Theory and Applications (2nd),”1979.
    14.Rao S.S., “Optimization Theory and Applications (2nd),”1979.
    17.Sharatchandra M.C., Sen Mihir, Gad-el-Hak M., “New Approach to Constrained Shape Optimization Using Genetic Algorithms,” AIAA Journal vol. 36, No. 1, January 1998.
    18.Vetterling W.T., Teukolsky A., Press W.H., Flannery B.H., ”Numerical recipes Example Book (C) 2nd, ”
    19.Vicini A., Quagliarella D., “Airfoil and Wing Design Through Hybrid Optimization Strategies,” AIAA Journal Vol. 37, No. 5, pp. 634-641, May 1999.
    20.Vicini A., Quagliarella D., “Inverse and Direct Airfoil Design Using a Multiobjective Genetic Algorithms,” AIAA Journal Vol. 35, No. 9, pp. 1499-1505, September 1997.
    20.Vicini A., Quagliarella D., “Inverse and Direct Airfoil Design Using a Multiobjective Genetic Algorithms,” AIAA Journal Vol. 35, No. 9, pp. 1499-1505, September 1997.
    22.Watt Alan, “Fundamentals of Three-Dimensional Computer Graphics,” Addison-Wesley, 1989.
    23.Wismer D. A., Charttergy R., ”Introduction to nonlinear Optimization, ”1970.
    23.Wismer D. A., Charttergy R., ”Introduction to nonlinear Optimization, ”1970.
    25.費培之, ”線性和非線性規劃引論及其應用, ”四川大學,1991.
    26.林豐澤,”結合遺傳演化方法於模擬退火求解組合性最佳化問題,” 博士論文,國立臺灣大學資訊工程研究所,1991.
    27.黃文志,”用遺傳演算法解集合涵蓋問題 = A genetic algorithm approach for set covering,” 碩士論文,國立台灣大學資訊所,1993.
    27.黃文志,”用遺傳演算法解集合涵蓋問題 = A genetic algorithm approach for set covering,” 碩士論文,國立台灣大學資訊所,1993.
    29.陳建志, ”應用遺傳演算法求解最佳機器人路徑及工作位置, ” 碩士論文,國立中央大學機械工程研究所,1993.
    30.陳宝林, ”最優化理論與算法, ”北京清華大學,1994.
    31.林嘉祥, ”以遺傳演算法求解機器人最佳運動姿勢及工件位置, ”碩士論文,國立中央大學機械工程研究所,1995.
    32.雷聲遠, ”近代計算流體力學, ”全華,1996.
    33.王鴻烈,林沐謙,邱勤山,姜太倫,葉清松,郭宏基, ”流體力學概論, ” 高力,1997.
    33.王鴻烈,林沐謙,邱勤山,姜太倫,葉清松,郭宏基, ”流體力學概論, ” 高力,1997.
    35.吳學鑑,翁家慶, ”平行混合多層遺傳學演算法於結構最佳化設計之研究,” 力學學會論文集,1999.
    36.陸冠群,闕仲輝, ”利用遺傳演算法最佳化設計馬達,” 機械工程學會論文集,1999.
    37.蔡惠峰, 國家高速電腦中心流力暨化工研究群, ”塑膠押出成型加工技術之設計研發與生產試造“ 國家高速電腦中心, 2000.
    38.國立編譯館,“ 高中基礎生物學“.
    Advisor
  • WEI-CHING YEH(葉維磬)
  • Files
  • 87323052.pdf
  • approve immediately
    Date of Submission 2000-07-14

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have dissertation-related questions, please contact with the NCU library extension service section.
    Our service phone is (03)422-7151 Ext. 57407,E-mail is also welcomed.