Title page for 87322042


[Back to Results | New Search]

Student Number 87322042
Author Chiun-Yian Tsan(蔡志揚)
Author's Email Address No Public.
Statistics This thesis had been viewed 1553 times. Download 970 times.
Department Civil Engineering
Year 1999
Semester 2
Degree Master
Type of Document Master's Thesis
Language zh-TW.Big5 Chinese
Title none
Date of Defense 2000-06-26
Page Count 41
Keyword
  • 彈塑性模型
  • 有限元素法
  • 破壞機制
  • 複合斜剪試體
  • 黏合材料
  • Abstract none
    Table of Content 摘要(中)…………………………………………………………………..I
    目錄…………………………………………………………………….…II
    圖目錄…………………………………………………………………….V
    表目錄……………………………………………………………………第一章緒論……………………………………………………….1
    1.1 前言………………………………………………………...1
    1.2 研究動機………………………………………………….1
    1.3 研究目的與研究方法…………………………………2
    1.4 修補材料分類及性質之簡介………………………3
    第二章文獻回顧………………………………………………..4
    2.1 相關課題之究………………………………………….4
    2.2 傳統修補試驗之式………………………………….11
    2.3 未來研究向……………………………………….……11
    第三章基本原理與分析法………………………….……13
    3.1 基本原理……………………………………………..….13
    3.1.1 材料力學……………………………………………...13
    3.1.2 塑性力學……………………………………………..14
    3.1.3 有限元素法…………………………………………..16
    3.2 分析方法………………………………………..………19
    3.2.1 力學解析解…………………………………………19
    3.2.2 有限元素分析之模型…………………….……….23
    3.2.2-1 試體尺寸與邊界條件……………………..……….23
    3.2.2-2 研究之參數………………………………..……….24
    3.2.2-3 混凝土與黏合材料之特性………………..……….25
    3.2.2-4 分析流程…………………………………..……….27
    第四章結果與討論……….……………………………………..28
    4.1 案例組一:(一般性參數影響之探討)……..……..28
    4.1.1 黏結界面上之主應力分布以及與加載位移之
    關係…………………………………………..…….……28
    4.1.1-1 總承載力σg與加載位移之關係…………….…..29
    4.1.1-2 應力集中的觀察……….………………….….…..29
    4.1.1-3 主應力值隨加載程度之變化趨勢…….…………30
    4.1.1-4 黏合材料種類與主應力分佈之關係…….………31
    4.1.1-5 黏合材料厚度的影響…….………………………32
    4.1.2 試體之承載極限與破壞情形之探討…………. 32
    4.1.2-1 承載極限之探討…………………………………. 33
    4.1.2-2 破壞情形之探討… … … … … … … … … … … … … . 34
    4.2 案例組二:(黏合材料角度與厚度關係之研
    究)………………………………………. 35
    第五章結論與建議…………………………………………..37
    5.1 結論……………………………………………………..37
    5.2 建議…………………………………………………….38
    參考文獻……………………………………………………………….39
    Reference 1. Wall, J. S.;and Shrive, N. G., “Factors Affecting Bond between New
    and Old Concrete,” ACI MATERIALS JOURNAL, Vol. 85, No. 2,
    pp.117-125, March-April 1988.
    2. Austin, S.;Robins, P.;and Pan, Y., “Shear bond testing of concrete
    repairs,” CEMENT AND CONCRETE RESEARCH, Vol. 29,
    3. Robins, P. J.;and Austin, S. A., “A unified failure envelope from the
    evaluation of concrete repair bond tests,” Magazine of Concrete
    Research, Vol. 47, No. 170, pp.57-68, 1995.
    4. Austin, S. A.;and Robins, P. J., “Development of patch test to study
    behaviour of shallow concrete patch repairs,” Magazine of Concrete
    Research, Vol. 45, No. 164, pp.221-229, 1993.
    5. Sancaktar, E., “Constitutive behavior and testing of structural
    adhesives,” Appl Mech Rev, Vol. 40, No. 10, pp.1393-1402, 1987.
    6. Abu-Tair, A. I.;Rigden, S. R.;and Burley, E., “Testing the Bond
    between Repair Materials and Concrete Substrate,” ACI Materials
    Journal, Vol. 93, pp.553-558, 1996.
    7. Knab, L. I.;and Spring C. B., “Evaluation of Test Methods for
    Measuring the Bond Strength of Portland Cement Based Repair
    Materials to Concrete,” Cement, Concrete, and Aggregates,
    CCAGDP, Vol. 11, No. 1, pp.3-14, 1989.
    8. Ferer, M.;and Smith, D. H., “A simple model of the adhesive failure
    of a layer : Cohesive effects,” J. Appl. Phys., Vol. 81, No.
    9. Sawa, T. ;Uchida, H., “A two-dimensional stress analysis and
    strength evaluation of band adhesive butt joints subjected to tensile
    loads,” J. Adhesive Sci. Technol., Vol. 11, No. 6, pp.811-833, 1997.
    10. Eyre, J. R.;and Campos, E. S., “Upper bounds in the slant shear
    testing of perfectly plastic joints in concrete,” Magazine of Concrete
    Research, Vol. 48, No. 176, pp.181-188, Sept. 1996.
    11. Sawa, T.,;Nakano, K.;and Toratani, H., “A two-dimensional stress
    analysis of single-lap adhesive joints subjected to tensile loads,” J,
    Adhesive Sci. Technol., Vol. 11, No. 8, pp.1039-1062, 1997.
    12. Tu, L.;and Kruger, D., “Engineering Properties of Epoxy Resins
    Used as Concrete Adhesives,” ACI MATERIALS JOURNAL, Vol. 93,
    No. 1, pp.26-35, January-February 1996.
    13. Popelar, C. F.;and Liechti, K. M., “Multiaxial Nonlinear Viscoelastic
    Characterization and Modeling of a Structural Adhesive,” Journal of
    Engineering Materials and Technology, Vol. 119, pp.205-210, July
    1997.
    14. Sancaktar, E., “Recent approaches in constitutive behavior and
    testing of structural adhesives,” Appl. Mech. Rev., Vol. 49, No. 10,
    part 2, pp.128-138, October 1996.
    15. Adams, R. D.;and Mallick, V., “A Method for the Stress Analysis of
    Lap Joints,” J. Adhesion, Vol. 38, pp.199-217, 1992.
    16. Matsui, K., “Effects of size on nominal ultimate tensile stresses of
    adhesive-bonded circular or rectangular joints under bending or
    peeling load,” Int. J. Adhesion and Adhesives, Vol. 10, No. 2,
    pp.90-98, April 1990.
    17. Matsui, K., “Size-effects on average ultimate shear stresses of
    adhesive-bonded rectangular or tubular lap joints under
    tension-shear,” Int. J. Adhesion and Adhesives, Vol. 10, No. 2,
    pp.81-89, April 1990.
    18. Struble, L. J.;and Lange, D., “Do We Need a Standard Concrete
    Fracture Mechanics Test?” Cement, Concrete, and Aggregates,
    CCAGDP, Vol. 19, No. 2, pp.112-115, Dec. 1997.
    19. Shah, S. P., “An Overview of the Fracture Mechanics of Concrete,”
    Cement, Concrete, and Aggregates, CCAGDP, Vol. 19, No. 2,
    pp.79-86, Dec. 1997.
    20. Xu, S.;and Barr, B., “A probabilistic model of fracture in concrete
    and size effects on fracture toughness,” Magazine of Concrete
    Research, Vol. 47, No. 173, pp.311-320, Dec. 1995.
    21. Hsieh, S. S.;Ting, E. C.;and Chen, W. F., “A Plastic Fracture Model
    for Concrete,” Int. J. Solids Structures, Vol. 18, No. 3, pp.181-197,
    1982.
    22. Labbance, Mondher, “Computation Failure analysis of Reinforced
    Concrete Plate Assemblages,” Ph. D. Thesis, Purdue University, May
    1991.
    23. Dhir, R. K.;and Green, J. W., “Protection of Concrete,” 1st Edition,
    McGraw-Hill, E.&F. N. Spon, 1990.
    24. 蘇志昌,「砂漿材料於混凝土維修成效之研究」,國立中央大學土
    木工程研究所碩士論文,pp.41-43,中華民國八十五年六月。
    25. 洪熒璞,「水泥混凝土裂縫維修與貼片補強之研究」,國立中央大
    學土木工程研究所碩士論文,中華民國八十八年六月。
    26. 簡安健,「混凝土修補成效之數值分析」,國立中央大學土木工程
    研究所碩士論文,中華民國八十八年六月。
    Advisor
  • Jui-Hung Chang(張瑞宏)
  • Files
  • 87322042.pdf
  • approve immediately
    Date of Submission 2000-06-26

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have dissertation-related questions, please contact with the NCU library extension service section.
    Our service phone is (03)422-7151 Ext. 57407,E-mail is also welcomed.