Title page for 85346002


[Back to Results | New Search]

Student Number 85346002
Author Shang-Rong Shung(孫常榮)
Author's Email Address No Public.
Statistics This thesis had been viewed 1963 times. Download 1819 times.
Department Graduate Institute of Environmental Engineering
Year 2000
Semester 2
Degree Ph.D.
Type of Document Doctoral Dissertation
Language zh-TW.Big5 Chinese
Title none
Date of Defense 2001-01-18
Page Count 120
Keyword
  • 水溶性
  • 燒結
  • 矽質
  • 都市垃圾焚化飛灰
  • 重金屬
  • Abstract none
    Table of Content 封面
    中文摘要
    致謝
    目錄
    圖目錄
    表目錄
    第一章 前言
    1-1 研究源起與目的
    1-2 研究內容
    第二章 文獻回顧
    2-1 飛灰特性
    2-2 燒結基本原理
    2-3 飛灰重金屬之高溫行為
    2-4 飛灰重金屬之穩定化行為
    第三章 實驗材料與方法
    3-1 研究方法與流程
    3-2 實驗材料、設備與配置
    3-3 分析方法與設備
    第四章 水洗前處理及添加矽酸對飛灰燒結體重金屬溶出之影響
    4-1 水洗過程之質量平衡
    4-2 飛灰組成變化
    4-3 水洗前處理及矽酸外添加對飛灰重金屬溶出之影響
    4-4 TCLP溶出濃度
    第五章 都市垃圾焚化飛灰燒結體再資源化應用之研究
    5-1 添加高嶺土及下水污泥灰對飛灰燒結體中重金屬溶出特性之研究
    5-2 飛灰燒結體抗壓強度與健性
    第六章 結論與建議
    6-1 結論
    6-2 建議
    參考文獻
    附錄
    Reference Alba, S., Kambayashi, F. and Okada, M., Ash Melting Treatment by Rotating Type Surface Melting Furnace, Waste Management, 16(5/6), 431 (1996).
    Anthony, T. C. and Tay, J. H., “Municipal Solid Waste Incinerator Fly Ash for Geotechnical Applications”, Journal of Geotechnical Engineering - ASCE, Vol. 119, No. 5, pp. 811-825(1993).
    Berner, R.A. “Rate Control Of Mineral Dissolution Under Earth Surface Conditions. “Am.J.Sci. 278, 1235 (1978).
    Buchholz, B. A. and Landsberger, S., ”Leaching Dynamics Studies of Municipal Solid Waste Incinerator Ash”, Journal of the Air & Waste Management Association, Vol. 45, pp. 579-590(1995).
    Chan Chris C.Y., Kirk Donald, “Behaviour of Metals Under the Conditions of Roasting MSW Incinerator Fly Ash With Chlorinating” Journal of Hazardous Materials 64 75 (1999).
    Chan, C., Jia, C. Q., Graydon, J. W. and Kirk, D. W., “The Behaviour of Selected Heavy Metal in MSW Incineration Electrostatic Precipitator Ash during Roasting with Chlorination Agents”, Journal of Hazardous Materials,50,1 (1996).
    Derie, R.,“A New Way to Stabilize Fly Ash from Municipal Incinerators”, Waste Management, Vol. 16, No. 8, pp. 711-716(1996).
    Eighmy, T. T., Eusden, J. D., Krzanowski, J. E. and et al., “Comprehensive Approach toward Understanding Element Speciation and Leaching Behavior in Municipal Solid Waste Incineration Electrostatic Precipitator Ash”, Environmental Science & Technology, Vol. 29, No. 3, pp.629-646(1995).
    Erich, R., “Mineral Impurities In Coal Combustion Behavior, Problems, and Remedial Measures,” Springer-Verlag, p 308, (1985).
    Fernandez - Turiel, J. L., Carvalho, W., Cabanas, M. and Querol, M., “Mobility of Heavy Metals from Coal Fly Ash”, Environmental Geology, Vol. 23, pp. 264-270(1994).
    Fisher, G. L., Chang, D. P. Y., and Brummer, M., Fly Ash Collected from Electrostatic Precipitators: Microcrystalline Structures and Mystery of the Spheres, Science, 192, 553 (1976).
    Gardner, K. H. Characterization of Leachates from Municipal Incinerator Ash Materials, Thesis, Clarkson University, (1991)
    German, R. M., Sintering theory and practice, John Wiley & Sons, New York, pp. 1-2(1996).
    Gong, Y. and Kirk, D. W., “Behaviour of Municipal Solid Waste Incinerator Fly Ash. I : General Leaching Study”, Journal of Hazardous Materials, Vol. 36, pp. 249-264(1994).
    Hupa, M. B-J Skrifvars and Moilanen, ”Measuring the sintering tendency of ash by a laboratory method ,” Journal of the Institute of Energy, pp. 131-137(1989).
    Iori, J., Balg, J. and Wieckert, C., “Detoxification of Municipal Waste Incineration Residues by Vitrification”, ABB Review, Vol. 6/7, pp. 9-16(1995).
    Jakob, A., Stucki, S. and Kuhn, P, “Evaporation of Heavy Metals during the Heat Treatment of Municipal Solid Waste Incinerator Fly Ash”, Environmental Science & Technology, Vol.29, No. 9, pp. 2429-2436(1995).
    Jakob, A., Stucki, S. and Struis, R. P. W. J., “Complete Heavy Metal Removal from Fly Ash by Heat Treatment : Influence of Chlorides on Evaporation Rates”, Environmental Science & Technology, Vol. 30, No. 11, pp. 3275-3283(1996).
    Jung, B. and Schobert, H. H., “Viscous Sintering of Coal Ashes. 1.Relationships of Sinter Point and Sinter Strength to Particle Size and Composition” Energy & Fuels 5(4) 555 (1991).
    Kida, A., Noma, Y. and Imada, T., “Chemical Speciation and Leaching Properties of Elements in Municipal Incinerator Ashes”, Waste Management, Vol. 16, Nos. 5/6, pp. 527-536(1996).
    Kirby, C. S. and Rimstldt, J. D., “Minerology and Surface Properties of Municipal Solid Waste Ash”, Environmental Science & Technology, Vol. 27, No. 4, pp. 652-660(1993).
    Klein, D.H., Andren, A.W., Lawasani, M.H., West, R.E. Environ. Sci. Technol. 9,862-869 (1976).
    Marsh, H. A-F, Investigation of the behaviour of Thermally treated Municipal Solid Waste Fly Ash, Thesis, University of Toronto, (1997).
    Moilanen, A. S. Kline, R. Carty, and D. Mason, “ The Effect of Ash Viscosity on the Sintering of Peat Fly-Ash,” Journal of the Institute of Energy, March 64, pp.21-25, (1991).
    Nowok, J.W., Benson, S.A., Steadman, E.N., and Brekke, D.W., The effect of surface tension/viscosity ratio of melts on the sintering propensity of amorphous coal ash slags, Fuel, Vol. 72, No. 7, pp. 1055-1061, (1993).
    Nowok, J.W., Benson, S.A., Michael, L.J. and Kalmanovitch D.P., August, Sintering behavior and strength development in various coal ashes, Fuel, Vol. 69, No. 7, pp. 1020-1028, (1990).
    Nowok, J.W., Hurley J.P. and Benson S. A. “The Role of Sulphate-Silicate Phase Separation in the Sintering Propensities of Coal Fly-ash at 800-1000℃” Journal of the Institute of Energy 69 12 (1996a).
    Nowok, J. W., ”Densification, shrinkage and strength development in selected coal ashes,” Journal of the Institute of Energy, March 69, pp.9-11, (1996b).
    Ontiveros, J. T., Clapp, T. L. and Kosson, D. S., “Physical Properties and Chemical Species Distributions Within Municipal Waste Combuster Ashes”, Environmental Progress, Vol. 8, No. 3, pp.200-206(1989).
    Pampuch, R., Ceramic Materials an Introduction to Their Properties, Elsevier Scientific Publishing Company, New York, pp. 130-136, (1976).
    Skrifvars, B. J., Hupa, M., Backman, R. and Hiltunen, M., “Sintering Mechanisms of FBC Ashes”, Fuel, Vol. 73, No. 2, pp. 171-176(1994).
    Steenar B.M. and Lindqvist O. “High-Temperature Reaction of Straw Ash and the Anti-Sintering Additives Kaolin and Bolomite” Biomass and Bioenergy 14 No.1 67 (1998).
    Tay, J. H. and Goh, A. T. C., “Engineering Properties of Incinerator Residue”, Journal of Environmental Engineering - ASCE, Vol. 117, No. 2, pp. 224-235(1991).
    Taylor, D. R., Tompkins, M. A., Kirton, S. E., Mauney, T. and Natusch, F. S., “Analysis of Fly Ash Produced from Combustion of Refuse-Derived Fuel and Coal Mixtures”, Environmental Science & Technology, Vol. 16, No. 3, pp. 148-154(1982).
    The International Ash Working Group(IAWG), “Municipal Solid Waste Incinerator Residues”, Elsevie, (1997).
    Vassilev S.V., Braekman-Danheux C., Laurent Ph., Thiemann T., Fontana A. “Behaviour, Capture and Inertization of Some Trace Elements During Combustion of Refuse-Derived Char From Municipal Solid Waste” Fuel 78(26) 1131 (1999).
    Wunsch P., Greilinger C., Bienick D. and Kettrup A. “Investingation of the Binding of Heavy Metals in Thermally Treated Residues From Waste Incineration” Chemosphere Vol.32 No.11 2211 (1996).
    Xavier Querol, Jose Luis Fernandez-Turiel and Angel Lopez-Soler “Trace Element in Coal and Their Behavior During Combustion in a Large Power Station” Fuel Vol.74 No.3 331-343 (1995).
    王鯤生,“一般廢棄物焚化灰渣之有害物質特性研究”,行政院環保署委託報告,EPA-85-E3H1-09-02(1996)。
    王鯤生,彭竟凱,江康鈺,劉愷,“垃圾焚化飛灰成形燒結處理特性之研究”,第十屆廢棄物處理技術研討會論文集,pp. 371-377,台南(1995)。
    行政院環保署網站,http://www.epa.gov.tw/index.html (12, 2000)。
    伍祖璁,黃錦鐘(譯),German, R. M.(著),“粉末冶金”,高立圖書公司,台北(1996)。
    汪建民,陶瓷技術手冊(上),中華民國產業科技發展協進會,中華民國粉末冶金協會,台北,第94頁(1994)。
    李建中,李釗,何啟華,鄭清江,垃圾焚化灰燼之力學特性與在大地工程之應用,一般廢棄物焚化灰渣資源化技術與實務研討會論文集,pp. 193-225,台北(1996)。
    高思懷,王鯤生,垃圾焚化灰渣利用之研發建制及推廣計劃-第一年,行政院環保署專題計劃,計劃編號EPA-87-E3H1-03-01,台北(1998)。
    程道腴、鄭武輝「科學圖書大庫---窯業原料手冊」徐式基金會出版,(1986)。
    程道腴、鄭武輝「科學圖書大庫---工業陶瓷」徐式基金會出版,(1998)。
    曾豐益,“垃圾焚化飛灰及灰渣中重金屬之濃度與分佈的探討”,國立中央大學環境工程研究所碩士論文,中壢(1994)。

    梁繼文,礦物學,五南圖書出版社,台北 (1981) 。
    葉宗智,垃圾焚化飛灰粒徑對燒結效果之研究,碩士論文,國立中央大學環境工程研究所,中壢(1997)。

    歐陽嶠暉,許鎮龍,藍文忠,「都市污水處理廠污泥處理與資源化再利用之研究」,第八屆下水道技術研討會論文集,台北(1998)
    廖錦聰,徐文慶,張蕙蘭,黃契儒,焚化灰渣資源化研究,工業技術研究院化學工業研究所研究報告,新竹(1996)。
    劉建良「都市垃圾焚化飛灰組成對燒結特性的影響」,碩士論文,國立中央大學環境工程研究所,中壢(1999)。

    賴耿陽(譯),松山芳治,三谷裕康,鈴木壽(著),“粉末冶金學概論”,復漢出版社,台南(1990)。
    顧順榮,“重金屬於都市垃圾焚化過程之濃度分布及溶出特性”,國立中央大學環境工程研究所碩士論文,中壢(1994)。

    魏玉麟、洪崇舜,「熱處理含鉛鎘吸附劑之研究」,第十三屆廢棄物處理技術研討會論文集,高雄市,p355 (1998)。
    魏玉麟、呂雅湘,「混合及單項吸附劑對鉛吸附之探討」,第十四屆廢棄物處理技術研討會論文集,中壢,p3-108 (1999)。
    Advisor
  • Kuen-Sheng Wang(王鯤生)
  • Files
  • 85346002.pdf
  • approve immediately
    Date of Submission 2001-01-18

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have dissertation-related questions, please contact with the NCU library extension service section.
    Our service phone is (03)422-7151 Ext. 57407,E-mail is also welcomed.