碩博士論文 965201027 詳細資訊


[回到前頁查詢結果 | 重新搜尋]

姓名 盧星辰(Hsing-Chen Lu)
查詢紙本館藏  
電子郵件信箱 E-mail 資料不公開
畢業系所 電機工程研究所(Electrical Engineering)
畢業學位 碩士(Master) 畢業時期 097學年第2學期
論文名稱(中) 應用於隨機存取記憶體之有效良率及可靠度提升技術
論文名稱(英) Efficient Yield and Reliability Enhancement Techniques for Random Access Memories
檔案
965201027.pdf
  1. 本電子論文使用權限為三年後開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 三年後開放
論文語文/頁數 英文/81
統計 本論文已被瀏覽 902 次,被下載 375 次
摘要(中) 良率和可靠度是設計奈米層級(nano-scale)晶片的兩個關鍵挑戰。嵌入式記憶體在現今的系統晶片(system-on-chip,SOC)中是重要的組件。因為嵌入式記憶體通常佔據很大比例的晶片面積,而且設計時會使用最小尺寸的電晶體和侵略性的設計規則(aggressive design rule),使得嵌入式記憶體的良率和可靠度將會主宰整個系統晶片,所以在系統晶片中,有效的提升嵌入式記憶體的良率和可靠度是非常重要的。
自我診斷(built-in self-diagnosis,BISD)和自我修復(built-in self-repair,BISR)電路是兩個主要提高嵌入式記憶體良率的技術。典型的自我診斷電路會將診斷資料序列輸出;在論文的第一部分,我們針對有錯誤更正碼(error correction code,ECC)的記憶體提出一個減少診斷資料的壓縮的方法,因為我們重複利用錯誤更正碼的電路來做壓縮,所提出的診斷資料壓縮方法能有效率的壓縮資料,而且付出的額外的面積成本非常低。
在論文的第二部分,我們針對有錯誤更正碼的記憶體提出一個透明自我修復(transparent BISR)的技術來提高記憶體的良率和可靠度,在量產階段,所提出的透明自我修復的技術可以執行離線測試/修復(off-line test/repair),在現場系統操作時,則可以執行線上測試卅修復(online test/repair)。執行線上測試卅修復時,我們使用透明測試(transparent test)來測試待測記憶體,並且使用離線測試/修復所剩下的備份元件(spare)來修復線上測試所測到的硬錯誤(hard fault),如此可以延長記憶體的可靠度。與其他現存的透明測試技術做比較,所提出的技術有以下優點:診斷錯誤位置的能力和低測試複雜度,另外,所提出的透明自我修復的技術面積成本不高,對於一個4K×39-bit的記憶體,大約只多出4.8%的面積。
在論文的第三部分,我們針對多個同質性記憶體(multiple homogeneous RAMs)提出一個分享式(shared)的透明自我測試和修復技術來減少面積成本,所提出的透明自我測試和修復技術建構一個分享式的錯誤更正碼記憶體來儲存待測記憶體的特徵值(signature),利用分時多工(time-multiplexing)的方法,我們可以一對一對記憶體做測試和修復,因為分享式的錯誤更正碼記憶體是被多個同質性記憶體所共享,所以面積成本相對降低。與傳統的透明自我測試方法比較,所提出的方法有診斷錯誤位置的能力,而且對於一個N×B-bit記憶體特徵預測時間(signature prediction phase)只要1N。 
摘要(英) Yield and reliability are two key challenges for designing nano-scale chips. Embedded memory is one key component in modern system-on-chip (SoC) designs. It typically represents a significant portion of the chip area as well. Moreover, it is designed with the smallest transistors and aggressive design rules. Thus, the yield and reliability of embedded memories dominate that of SoCs. Therefore, efficient yield and reliability enhancement techniques for embedded memories are very important for SoCs.
Built-in self-diagnosis (BISD) and built-in self-repair(BISR) are two key techniques for improving the yield of embedded memories. Typically, a BISD design exports diagnostic data serially. In the first part of this thesis, a diagnostic data compression technique is proposed to reduce the diagnostic data of a RAM with error correction code (ECC). By reusing the ECC circuit, the proposed approach can compress the diagnostic data efficiently with very low area cost.
In the second part of this thesis, a transparent BISR scheme for RAMs with ECC is proposed to enhance the yield and reliability of RAMs. The transparent BISR scheme can perform off-line test/repair for RAMs in production phase. It also can perform online test/repair for RAMs in operation. In online test/repair mode, the transparent BISR scheme performs transparent march tests for the RAM under test and repairs the RAM cells with hard faults if some spares are unused after the off-line test/repair phase. This can prolong the reliability of the RAM. In comparison with existing transparent test approaches, the proposed transparent test approach has the following advantages: fault-location capability and low test complexity. Experimental results show that the area cost of the proposed transparent BISR scheme for RAMs with ECC is low—only about 4.8% for a 4K×39-bit SRAM.
In the third part of this thesis, a shared transparent test and repair scheme for multiple homogeneous RAMs without ECC is proposed to reduce the area cost. In the shared transparent test and repair scheme, a shared code memory is designed to store the signature of a RAM under test. Thus, the RAMs sharing the code memory are tested and repaired one by one in a time-multiplexing method. Since the code memory is shared by multiple homogeneous RAMs, the area cost of the transparent test and repair scheme is reduced. In comparison with typical transparent BIST schemes, the proposed scheme has good fault location capability. The signature prediction phase is only 1N for an N×B-bit RAM.
關鍵字(中)
  • 線上透明測試/修復
  • 診斷資料壓縮
  • 隨機存取記憶體
  • 關鍵字(英)
  • Diagnostic Data Compression
  • Online Transparent Test/Repair
  • Random Access Memories
  • 論文目次 Contents
    1 Introduction 1
    1.1 Yield-Enhancement Techniques for RAMs 1
    1.1.1 Built-In Self-Test and Built-In Self-Diagnosis Techniques 1
    1.1.2 Built-In Self-Repair Techniques 3
    1.2 Reliability Enhancement Techniques for RAMs 6
    1.2.1 Error Correction Code Techniques 6
    1.2.2 Periodic Transparent Test Techniques 9
    1.3 Thesis Contribution 12
    1.4 Thesis Organization 13
    2 Diagnosis of RAMs with ECC using Syndrome Compression 14
    2.1 Review of Diagnostic Data Compression Schemes 14
    2.2 Syndrome Compression Scheme by Reusing ECC Encoder 15
    2.2.1 Overview of Proposed Syndrome Compression Scheme 15
    2.2.2 BISD mplementation 18
    2.3 Evaluation and Analysis 20
    2.3.1 Compression Ratio and Re-construction Ratio Evaluation 20
    2.3.2 Hardware Overhead 24
    2.3.3 Comparison and Summary 27
    3 Transparent Test and Repair Techniques for RAMs with ECC 30
    3.1 Programmable Online/Off-line Built-In Self-Test Scheme for RAMs with ECC 31
    3.2 Programmable Online/Off-line Built-In Self-Repair Scheme for RAMs with ECC 34
    3.3 Experimental Results and Analysis 41
    3.3.1 Reliability Evaluation 41
    3.3.2 Hardware Overhead and Yield Improvement 50
    3.3.3 Comparison and Summary 54
    4 Transparent Test/Repair Schemes for Homogeneous RAMs in Multi-Core Chips 56
    4.1 Transparent Test/Repair Schemes for Homogeneous RAMs 56
    4.2 In-Field Diagnosis and Repair Scheme for RAMs using Wireless Test Platform 65
    4.3 Experimental Results and Analysis 68
    4.3.1 Hardware Overhead 68
    4.3.2 Comparison and Summary 69
    5 Conclusions and Future Work 72
    5.1 Conclusions 72
    5.2 Future Work 73
    Bibliography 74
    參考文獻 [1] J.-F. Li, “Transparent test methodologies for random access memories without/with ECC,” IEEE Trans. on Computer-Aided Design of Integrated Circuits and Systems, vol. 26, no. 10, pp. 1888–1893, Oct. 2007.
    [2] J.-F. Li, R.-S. Tzeng, and C.-W. Wu, “Diagnostic data compression techniques for embedded memories with built-in self-test,” Jour. of Electronic Testing: Theory and Applications, vol. 18, no. 4-5, pp. 515–527, Aug.-Oct. 2002.
    [3] J. T. Chen, J. Rajski, J. Khare, O. Kebichi, and W. Maly, “Enabling embedded memory diagnosis via test response compression,” in Proc. IEEE VLSI Test Symp. (VTS), Marina Del Rey, California, Apr. 2001, pp. 292–298.
    [4] J. T. Chen, J. Khare, K. Walker, S. Shaikh, J. Rajski, and W. Maly, “Test response compression and bitmap encoding for embedded memories in manufacturing process monitoring,” in Proc. Int’l Test Conf. (ITC), Baltmore, Oct. 2001, pp. 258–267.
    [5] R.-F. Huang, C.-L. Su, C.-W. Wu, Y.-J. Chang, and W.-C. Wu, “A memory built-in self-diagnosis design with syndrome compression,” in Proc. IEEE Int’l Workshop on Current & Defect Based Testing (DBT), Napa Valley, Apr. 2004, pp. 97–102.
    [6] C.-L. Su, R.-F. Huang, C.-W. Wu, Y.-J. Chang, and S.-T. Lin, “Embedded memory diagnostic data compression using differential address,” in Proc. Int’l Symp. on VLSI Technology, Systems, and Applications: Design, Automation and Test (VLSITSA- DAT), Hsinchu, Apr. 2005, pp. 20–23.
    [7] C.-T. Huang, J.-R. Huang, C.-F. Wu, C.-W. Wu, and T.-Y. Chang, “A programmable BIST core for embedded DRAM,” IEEE Design & Test of Computers, vol. 16, no. 1, pp. 59–70, Jan.-Mar. 1999.
    [8] P. Camurati, P. Prinetto, M. S. Reorda, S. Barbagallo, A. Burri, and D. Medina, “Industrial BIST of embedded RAMs,” IEEE Design & Test of Computers, vol. 12, no. 3, pp. 86–95, Fall 1995.
    [9] C.-W. Wang, C.-F. Wu, J.-F. Li, C.-W. Wu, T. Teng, K. Chiu, and H.-P. Lin, “A built-in self-test and self-diagnosis scheme for embedded SRAM,” Jour. of Electronic Testing: Theory and Applications, vol. 18, no. 6, pp. 637–647, Dec. 2002.
    [10] R. Rajsuman, “Design and test of large embedded memories: an overview,” IEEE Design & Test of Computers, vol. 18, no. 3, pp. 16–27, May 2001.
    [11] Y. Zorian and S. Shoukourian, “Embedded-memory test and repair: Infrastructure IP for SoC yield,” IEEE Design & Test of Computers, vol. 20, no. 3, pp. 58–66, May-June 2003.
    [12] B. W. Johnson, Design and Analysis of Fault Tolerant Digital Systems. Reading, Massachusetts: Addison-Wesley, 1989.
    [13] M. Nicolaidis, “Design for soft error mitigation,” IEEE Trans. on Device and Meterials Reliability, vol. 5, no. 3, pp. 405–418, 2005.
    [14] E. J. Marinissen, B. Prince, D. Keitel-Schulz, and Y. Zorian, “Challenges in embedded memory design and test,”in Proc. Conf. Design, Automation, and Test in Europe DATE), 2005, pp. 722–777.
    [15] M. Nicolaidis, “Transparent BIST for RAMs,” in Proc. Int’l Test Conf. (ITC), 1992, pp. 598–607.
    [16] ——, “Theory of transparent BIST for RAMs,” IEEE Trans. on Computers, vol. 45, no. 10, pp. 1141–1156, Oct. 1996.
    [17] V. Yarmolik and M. Karpovski, “Transparent memory testing for pattern-sensitive faults,” in Proc. Int’l Test Conf. (ITC), 1994, pp. 860–869.
    [18] M. Karpovski and V. Yarmolik, “Transparent memory BIST,” in Proc. IEEE Int’l Workshop on Memory Technology, Design and Testing (MTDT), 1994, pp. 106–111.
    [19] B. F. Cockburn and Y.-F. N. Sat, “A transparent built-in self-test scheme for detecting single V-coupling faults in RAMs,” in Proc. IEEE Int’l Workshop on Memory Technology, Design and Testing (MTDT), 1994, pp. 119–124.
    [20] ——, “Synthesized transparent BIST for detecting scrambled pattern-sensitive faults in RAMs,” in Proc. Int’l Test Conf. (ITC), Oct. 1995, pp. 23–32.
    [21] V. N. Yarmolik and S. ellebrand, “Symmetric transparent BIST for RAMs,” in Proc. Conf. Design, Automation, and Test in Europe (DATE), 1999, pp. 702–707.
    [22] S. Demidenko, A. J. van de Goor, S. Henderson, and P. Knoppers, “Simulation and development of short transparent tests for RAM,” in IEEE Asian Test Symp. (ATS), 2001, pp. 164–169.
    [23] D. Huang and W. Jone, “A parallel transparent BIST method for embedded memory arrays by tolerating redundant operations,” IEEE Trans. on Computer-Aided Design of Integrated Circuits and Systems, vol. 21, no. 5, pp. 617–628, May 2002.
    [24] H.-S. Kim and S. Kang, “DPSC SRAM transparent test algorithm,” in IEEE Asian Test Symp. (ATS), Nov. 2002, pp. 145–150.
    [25] K. Thaller and A. Steininger, “A transparent online memory test for simultaneous detection of functional faults and soft errors in memories,” IEEE Trans. Reliability, vol. 52, no. 4, pp. 413–422, Dec. 2003.
    [26] A. P. Zankovich, V. N. Yarmolik, and B. Sokol, “Automatic generation of symmetric transparent March memory tests,” in Proc. IEEE Int. CAD systems in Microelectronics, 2003, pp. 226–229.
    [27] J.-F. Li and T.-W. Tseng, “An efficient transparent test scheme for word-oriented memories,”in Proc. Conf. Design, Automation, and Test in Europe (DATE), Munich, Mar. 2005.
    [28] R. P. Treuer and V. K. Agarwal, “Built-in self-diagnosis for repairable embedded RAMs,” IEEE Design & Test of Computers, vol. 10, no. 2, pp. 24–33, June 1993.
    [29] D. Appello, V. Tancorre, P. Bernardi, M. Grosso, M. Rebaudengo, and M. Reorda, “Embedded memory diagnosis: an industrial workflow,” in Proc. Int’l Test Conf. (ITC), Santa Clara, Oct 2006, pp. 1–9.
    [30] T. Kawagoe, J. Ohtani, M. Niiro, T. Ooishi, M. Hamada, and H. Hidaka, “A built-in self-repair analyzer (CRESTA) for embedded DRAMs,” in Proc. Int’l Test Conf. (ITC), 2000, pp. 567–574.
    [31] D. Xiaogang, S. M. Reddy, W.-T. Cheng, J. Rayhawk, and N. Mukherjee, “At-speed built-in self-repair analyzer for embedded word-oriented memories,” in International Conference on VLSI Design, 2004, pp. 895–900.
    [32] S. Nakahara, K. Higeta, M. Kohno, T. Kawamura, and K. Kakitani, “Built-in self-test for GHz embedded SRAMs using flexible pattern generator and new repair algorithm,”in Proc. Int’l Test Conf. (ITC), 1999, pp. 301–310.
    [33] D. K. Bhavsar, “An algorithm for row-column self-repair of RAMs and its implementation in the Alpha 21264,” in Proc. Int’l Test Conf. (ITC), Atlantic City, Sept. 1999, pp. 311–318.
    [34] C.-T. Huang, C.-F. Wu, J.-F. Li, and C.-W. Wu, “Built-in redundancy analysis for memory yield improvement,” IEEE Trans. on Reliability, vol. 52, no. 4, pp. 386–399, Dec. 2003.
    [35] J.-F. Li, J.-C. Yeh, R.-F. Huang, C.-W. Wu, P.-Y. Tsai, A. Hsu, and E. Chow, “A built-in self-repair scheme for semiconductor memories with 2-D redundancy,” in Proc. Int’l Test Conf. (ITC), Charlotte, Sept. 2003, pp. 393–402.
    [36] S.-K. Lu, Y.-C. Tsai, C.-H. Hsu, K.-H. Wang, and C.-W. Wu, “Efficient built-in redundancy analysis for embedded memories with 2-D redundancy,” IEEE Trans. on VLSI Systems, vol. 14, no. 1, pp. 34–42, Jan. 2006.
    [37] Y. Zorian, “Embedded infrastructure IP for SOC yield improvement,” in Proc. IEEE/ACM Design Automation Conf. (DAC), New Orleans, June 2002, pp. 709–712.
    [38] C.-L. Su, R.-F. Huang, and C.-W. Wu, “A processor-based built-in self-repair design for embedded memories,” in Proc. 12th IEEE Asian Test Symp. (ATS), Xian, Nov. 2003, pp. 366–371.
    [39] T.-W. Tseng, J.-F. Li, C.-C. Hsu, A. Pao, K. Chiu, and E. Chen, “A reconfigurable built-in self-repair scheme for multiple repairable RAMs in SOCs,” in Proc. Int’l Test Conf. (ITC), Santa Clara, Oct 2006, Paper 30.2, pp. 1–8.
    [40] C.-D. Huang, J.-F. Li, and T.-W. Tseng, “ProTaR: an infrastructure IP for repairing RAMs in SOCs,” IEEE Trans. on VLSI Systems, vol. 15, no. 10, pp. 1135–1143, Oct. 2007.
    [41] T.-W. Tseng and J.-F. Li, “A shared parallel built-in self-repair scheme for random access memories in SOCs,” in Proc. Int’l Test Conf. (ITC), Santa Clara, Oct 2008, pp. 1–9.
    [42] A. Benso, S. Chiusano, G. Di Natale, and P. Prinetto, “An on-line BIST RAM architecture with self-repair capabilities,” IEEE Trans. on Reliability, vol. 51, no. 1, pp. 123–128, Mar. 2002.
    [43] M. Nicolaidis, N. Achouri, and L. Anghel, “A diversified memory built-in self-repair approach for nanotechnologies,” in Proc. IEEE VLSI Test Symp. (VTS), Apr. 2004, pp. 313–318.
    [44] C.-L. Su, Y.-T. Yeh, and C.-W.Wu, “An integrated ECC and redundancy repair scheme for memory,” in Proc. IEEE Int’l Symp. on Defect and Fault Tolerance in VLSI Systems (DFT), Monterey, CA, Oct. 2005, pp. 81–89.
    [45] R. W. Hamming, “Error detecting and error correcting codes,” Bell System Tech. J., vol. XXVI, no. 2, pp. 147–160, Apr. 1950.
    [46] K. Chankraborty and P. Mazumder, Fault-Tolerance and Reliability Techniques for High-Density Random-Acess Memories. Upper Saddle River, NJ: Prentice-Hall Inc., 2005.
    [47] A. J. van de Goor, “Using march tests to test SRAMs,” IEEE Design & Test of Computers, vol. 10, no. 1, pp. 8–14, Mar. 1993.
    [48] I. Mrozek and V. N. Yarmolik, “MATS+ transparent memory test for pattern sensitive fault detection,” in Proc. of the 15th Int’l Conf. Mixed Design of Integrated Circuits and Systems(MIXDES), June 2008, pp. 493–498.
    [49] I. Voyiatzis, “An accumulator-based compaction scheme for online BIST of RAMs,”IEEE Trans. on VLSI Systems, vol. 16, no. 9, pp. 1248–1251, Sept. 2008.
    [50] B. Nadeau-Dostie, A. Silburt, and V. K. Agarwal, “A serial interfacing technique for external and built-in self-testing of embedded memories,” IEEE Design & Test of Computers, vol. 7, no. 2, pp. 56–64, Apr. 1990.
    [51] V. N. Yarmolik, S. Hellebrand, and H. Wunderlich, “Self-adjusting output data compression: an efficient BIST technique for RAMs,” in Proc. Conf. Design, Automation, and Test in Europe (DATE), 1998, pp. 173–179.
    [52] S. Hellebrand, H. Wunderlich, A. Ivaniuk, Y. Klimets, and V. N. Yarmolik, “Error detecting refreshment for embedded DRAMs,” in Proc. IEEE VLSI Test Symp. (VTS), 1999, pp. 384–390.
    [53] ——, “Efficient online and offline testing of embedded DRAMs,” IEEE Trans. on Computers, vol. 51, no. 7, pp. 801–809, July 2002.
    [54] N. Mukherjee, A. Pogiel, J. Rajski, and J. Tyszer, “High throughput diagnosis via compression of failure data in embedded memory BIST,” in Proc. Int’l Test Conf. (ITC), Santa Clara, Oct 2008, pp. 1–10.
    [55] S. Boutobza, M. Nicolaidis, K. M. Lamara, and A. Costa, “A transparent based programmable memory BIST,” in Proc. IEEE European Test Symp. (ETS), May 2006, pp. 89–96.
    [56] S. Elkind and D. Siewiorek, “Reliability and performance of error-correcting memory and register arrays,” IEEE Trans. on Computers, vol. C-29, no. 10, pp. 920–927, Oct. 1980.
    [57] M. Blaum, R. Goodman, and R. McEliece, “The reliability of single-error protected computer memories,” IEEE Trans. on Computers, vol. 37, no. 1, pp. 114–119, Jan 1988.
    [58] A. Saleh, J. Serrano, and J. Patel, “Reliability of scrubbing recovery-techniques for memory systems,” IEEE Trans. on Reliability, vol. 39, no. 1, pp. 114–122, Apr. 1990.
    [59] R. Goodman and M. Sayano, “The reliability of semiconductor RAM memories with on-chip error-correction coding,” IEEE Trans. on Information Theory, vol. 37, no. 3, pp. 884–896, May 1991.
    [60] R.-F. Huang, J.-F. Li, J.-C. Yeh, and C.-W.Wu, “A simulator for evaluating redundancy analysis algorithms of repairable embedded memories,” in Proc. IEEE Int’l Workshopon Memory Technology, Design and Testing (MTDT), Isle of Bendor, France, July 2002, pp. 68–73.
    [61] L.-T. Wang, C.-W. Wu, and X. Wen, Design for Testability: VLSI Test Principles and Architectures. San Francisco: Elsevier (Morgan Kaufmann), 2006.
    [62] J. Gatej, S. Lee, C. Pyron, and R. Raina, “Evaluating ATE features in terms of test escape rates and other cost of test culprits,” in Proc. Int’l Test Conf. (ITC), Santa Clara, Oct 2002, pp. 1040–1049.
    [63] R. Rajsuman, N. Masuda, and K. Yamashita,“Architecture and design of an open ATE to incubate the development of third-party instruments,” IEEE Transactions on Instrumentation and Measurement, vol. 54, no. 5, pp. 1678–1698, Oct. 2005.
    [64] H. Eberle, A. Wander, and N. Gura, “Testing systems wirelessly,” in Proc. IEEE VLSI Test Symp. (VTS), Apr. 2004, pp. 335–340.
    [65] C.-W. Wu, C.-T. Huang, S.-Y. Huang, P.-C. Huang, T.-Y. Chang, and Y.-T. Hsing, “The HOY tester—Can IC testing go wireless?” in Proc. Int’l Symp. on VLSI Design, Automation, and Test (VLSI-DAT), Hsinchu, Apr. 2006, pp. 183–186.
    [66] P.-K. Chen, Y.-T. Hsing, and C.-W. Wu, “On feasibility of HOY—a wireless test methodology for VLSI chips and wafers,” in Proc. Int’l Symp. on VLSI Design, Automation, and Test (VLSI-DAT), Hsinchu, Apr. 2006, pp. 243–246.
    [67] C.-W. Wu, “How far can we go in wireless testing of memory chips and wafers?” in Proc. IEEE Int’l Workshop on Memory Technology, Design and Testing (MTDT), Dec. 2007, pp. 31–32.
    指導教授
  • 李進福 (Jin-Fu Li)
  • 口試日期 2009-07-07 繳交日期 2009-08-30

    [回到前頁查詢結果 | 重新搜尋]


    若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡